The cost-effective hammerset anchor without approval for multiple fixings in non-structural systems
The fischer hammerset anchor EA N is an internal thread anchor made from zinc-plated and stainless steel. The hammerset anchor is ideal for the multiple fixation of non-structural systems that do not require approved anchorage. The assembly of the internal thread anchor is extremely cost-effective thanks to the low embedment depth, fast hammerset installation, and direction-controlled screwing process. The EA N is mounted with the hammer flush to the base material. With the setting tool EA-ST, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion.
The EA N is suitable for pre-positioned installation.
Position the hammerset anchor in the drill hole and drive in flush to the surface of the base material using the hammer.
The setting tool EA-ST is then used to expand the sleeve against the drill hole wall by driving in the internal pin.
The setting tools must sit on the edge of the anchor to ensure correct expansion.
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.
